Name: GSM Wireless Alarm System-G71
Support Contact ID Communication protocol
LED Display, With Touch Keypad

Main Features:
Adopt GSM Cellular Network & Telephoneline Network For Alarm Transmission.
With LED Display, build-in Touch keypad
Compatible with GSM network, reports alarm events by calling and SMS.
Use SIM card,up to 6 phone numbers(2 for management center, 4 for personal) can be pre-stored and then dial in sequence when alarming. Each number can be set as phone call alarm or SMS alarm according to actual needs.
15 wireless zones (Each zone supports up to 4 sensors) and 1 dedicated zones for remotes (Supports up to 10 remotes). 8 wired zones can be extended and each wired zone can be separately armed and disarmed.
Record up to a 10 second voice message in the host, then can be heard via phone when answering alarm call.
Intelligent logic analysis technology, corresponding zone number can be displayed by LED lights. Corresponding zone number and sensor name can be displayed via SMS.
Disconnection alarm, auto priority to occupy the telephone and monitoring function to hear what is happening.
5-ways of arm/disarm:SMS, remote controller, built-in keypad, wireless keypad(optional device), phone call.
Non-volatile chip, information stored automatically when off power.
One-key arm,learning sensors to alarm host, very easy operation.
Built-in Li-Ion backup battery, available in AC\DC. System self-check, alert of low backup battery power.
Supports Contact ID uploading to CMS(Center monitoring Station).

Main Unit PCB Board:

Technical Parameter:
Working voltage：100~240VAC
Operating power: 9-15VDC
GSM Frequency：900/1800MHZ, 900/1800/1900MHZ, 850/900/1800/1900MHZ
Wireless Frequency：433MHZ / 868MHZ
Static current: ≤ 80mA
Alarm current: ≤ 500mA
GSM Cellular Transmission Power: 2W
Operating environment: Temperature: -10℃-50℃; Humidity:＜90%
Maximum available quantity of keychain (remote controllers) : 4 PCS
Maximum available quantity of wireless sensors: 116 PCS
Dimension：180*120*5(mm)

Standard Package:
- Touch screen Alarm system (control unit) – 1 pc.
- Wireless PIR detector – 1 pc.
- Wireless door (gap) sensor – 1 pc.
- Remote controller– 2 pcs.
- Antenna – 1pc.
- Wireless Strobe Siren – 1 pc.
- Power adpater – 1pc.
- User manual – 1pc.